oosVersion 2.1
VLAN
Overview and configuration guide for Virtual LAN (VLAN) in OOS.
A VLAN (Virtual LAN) divides devices on one physical LAN into logical groups. For example, when groups need separate network settings, plan the VLANs first, then assign ports to the appropriate groups.
Understand the Settings First
- VLAN ID identifies a group. In the original configuration, all interfaces belong to VLAN 1 by default.
- Access mode assigns an interface to a selected VLAN. Trunk mode lets you add multiple VLANs to an allowed list.
- The VLAN page lists interfaces assigned as LAN. If an interface is missing, check Port Types first.
Changing the VLAN of the interface used to manage OOS may interrupt access. Confirm the target interface, VLAN ID, and management address you will use afterward.
Continue with the Configuration
The full procedure is in the LAN Manual. Start with "Adding a VLAN ID," then follow the Access or Trunk mode section to assign interfaces. Use List to check newly added VLAN IDs. If devices in the group need automatic IP assignment, continue with DHCP on the same page.