oosVersion 1.0

Troubleshooting

OOS troubleshooting

When a connection fails, first distinguish whether OOS itself cannot access the internet, a computer connected to OOS cannot access it, or only a particular website fails. Record the time, connection method, and on-screen message, then select the matching chapter.

Choose by Symptom

Two common wired-connection checks follow. Change one setting at a time and retest. If the issue remains, save results from the diagnostic tools or download system logs as described in Support.

An IP Address Is Assigned, but the Internet Is Unreachable

An IP address is a device’s numeric address on a network. If the Ethernet interface has an address but internet access fails, check Ping Target, the address OOS uses to test connection status. This is only one possible cause.

  1. Go to Networking > WAN > Multiple WAN > Interface > Action.
  2. Check whether the Ping Target needs to be changed.
  3. On a public network, Google DNS at 8.8.8.8 can be a test target; first confirm that the network permits access to it. On a private 5G network, use the local gateway IP supplied by the administrator.

Adjust the Ping Target

After changing it, recheck WAN status and test the required website or service from the device that originally failed.

This may be caused by network-interface compatibility between OOS and the other network device. Try the following in order:

  1. Connect the cable to a different port on the network device.
  2. Place a hub or switch between OOS and the network device.

Ethernet port status

After each cabling change, check the link light and speed, then test the actual connection. Reconnecting a cable interrupts that connection, so make sure this will not affect work in progress.