oosVersion 2.1

DHCP Server

Overview and configuration guide for DHCP Server in OOS.

A DHCP server automatically assigns IP addresses to local devices so users do not have to enter them one by one. OOS can provide this service to devices connected to LAN ports or Wi-Fi SSIDs. SSID is the network name shown when searching for Wi-Fi. DHCP is enabled on VLAN 1 by default.

When to Configure It

To provide automatic IP assignment on another VLAN (a logical local network group), or to set the address range devices may receive, prepare:

  • The target VLAN ID.
  • Gateway & Management IP: The gateway and OOS management address for that VLAN.
  • Netmask: The boundary of the local subnet.
  • Address range: The IP addresses available for assignment to devices.
  • DNS: The service address used to convert website names to IP addresses.

Use values planned by your network administrator. Changing the management IP or address allocation may affect current connections.

Configure and Check the Result

Follow "Adding a DHCP Server" in the LAN Manual. Select the VLAN, enter the details above, set Enable DHCP Server to ON, and apply. Connect a test device to the matching LAN or Wi-Fi and check that its assigned IP is within the configured address range.