oosVersion 2.1
Appendix: Glossary
Glossary
Use this page to look up common manual terms in plain language. Start with Networks and Addresses for network setup, or Mobile Networks and Signals for cellular checks. This is a reference, so no step-by-step action is required.
Networks and Addresses
| Name | Description |
|---|---|
| LAN (Local Area Network) | A local area network (LAN) is a collection of devices connected in the same physical location, such as a building, office, or home. |
| DHCP (Dynamic Host Configuration Protocol) | A network management protocol used to assign IP addresses to devices automatically. |
| DNS (Domain Name System) | The Domain Name System (DNS) is the Internet's system for mapping alphabetic names to numeric Internet Protocol (IP) addresses. |
| WAN (Wide Area Network) | A wide area network (WAN) is a collection of local area networks (LANs) or other networks that communicate with each other. |
| NAT (Network Address Translation) | Network Address Translation (NAT) is a process in which one or more local IP addresses are translated into one or more global IP addresses and vice versa to provide Internet access to local hosts. |
| Wi-Fi | Wi-Fi is a wireless network protocol, based on the IEEE 802.11 standards, used for local area networks of devices and Internet access by exchanging data via radio waves. |
| SSID (Service Set Identifier) | The wireless network name shown in the Wi-Fi list. Use it to identify the network you want to join. |
| ISP (Internet Service Provider) | An ISP is a company that provides individuals and organizations with access to the Internet and related services. |
| IP (Internet Protocol) | IP is the protocol used for network communication. An IP address is the numeric address of a device on the internet or a local network, used to identify a communication endpoint. |
| VLAN (Virtual Local Area Network) | A virtual local area network divides one physical network into separate logical networks. VLAN IDs (VIDs) identify the groups during configuration. |
Mobile Networks and Signals
The signal figures below are approximate reference values. dBm expresses power and dB expresses a relative difference. When checking connectivity, also review connection status and IP information.
| Name | Description |
|---|---|
| 5G NSA (5G Non-Standalone) | 5G NSA refers to a combined network of 5G and 4G LTE, where 5G networks are deployed on the basis of existing 4G infrastructure. |
| 5G SA (5G Standalone) | 5G SA is the standalone deployment of 5G where base stations, backhaul links, and core networks are all dedicated to 5G to maximize network performance. |
| IMEI (International Mobile Equipment Identity) | International Mobile Equipment Identity, used to identify mobile communication equipment. Distinguish it from IMSI, which identifies a subscriber. |
| IMSI (International Mobile Subscriber Identity) | International Mobile Subscriber Identity, usually a fifteen-digit number identifying a subscriber on mobile networks such as GSM and UMTS. Distinguish it from IMEI, which identifies equipment. |
| RSRP (Reference Signal Received Power) | The average power received from a single reference signal. A good RSRP is above -80 dBm, and a poor reading is generally below -100 dBm. |
| RSRQ (Reference Signal Received Quality) | Indicates the quality of the received signal. A good RSRQ is above -15 dB, and a poor reading is generally below -20 dB. |
| RSSI (Received Signal Strength Indication) | RSSI is a measurement of cellular signal strength. A good RSSI is above -65 dBm, and a poor reading is generally below -85 dBm. |
| RSCP (Received Signal Code Power) | RSCP is used as a parameter to measure 3G signal coverage quality. |
| SNR (Signal-to-noise ratio) | SNR compares the level of a desired signal to the level of background noise. A good SNR is above 13 dB, and a poor reading is generally below 0 dB. |
Notifications, Management, and Storage
| Name | Description |
|---|---|
| SMTP (Simple Mail Transfer Protocol) | Simple Mail Transfer Protocol is used by mail servers to send and relay email. It is used in OOS email alert settings. |
| SNMP (Simple Network Management Protocol) | Simple Network Management Protocol lets a monitoring system collect device information and perform management tasks according to access permissions. |
| CHAP (Challenge-Handshake Authentication Protocol) | Challenge-Handshake Authentication Protocol verifies identities between an iSCSI initiator and target. |
| IQN (iSCSI Qualified Name) | An iSCSI Qualified Name identifies an iSCSI device on a network. Use the target’s supplied name when connecting remote storage. |