oosVersion 2.1

APN Setting

Guide to applying configured APN profiles and verifying connection status in OOS.

APN Setting

An APN supplies the settings a SIM card needs to access a mobile network. First save a profile using APN Edit, then use this workflow to apply it to the current connection. Saving a profile alone does not switch the connection.

Applying a profile starts changing network settings immediately and may interrupt the mobile connection. If you manage OOS over this link, retain another management connection before proceeding.

The factory default profile is configured for public cellular networks.

Default public network APN setting interface


Steps to Apply APN Settings

  1. Go to Networking > Mobile Network.
  2. Click the "Setting" button to pop up the Setting dialog box.
  3. Select the APN Setting tab.
  4. Choose the desired profile from the Quick Select drop-down menu.
  5. Click "Apply".

Steps to apply APN profile

!WARNINGNotification: Switching between NSA and SA modes (NSA to SA or SA to NSA) requires additional network initialization time, typically taking approximately 3 minutes.

SA is a standalone 5G mode; NSA combines 5G and 4G. After allowing time for reconfiguration, return to Networking > Mobile Network. Confirm that APN Profile matches the intended profile and check for an IP Address. If there is signal but no IP address, compare the profile with the carrier's details rather than repeatedly switching modes.