oosVersion 2.1

Cell Scanner

Scan for nearby cellular base stations

A base station provides cellular network signals. Cell Scanner lists nearby base stations detected by a scan to help inspect the surrounding cellular environment.

Run a Scan

  1. Open Cell Scanner under Diagnose.
  2. Click Start to scan.
  3. Wait approximately 120 seconds, then review the base-station list.

Start a cell scan

Review the Results

Check whether the base-station list has appeared and keep the results for further troubleshooting. If a cellular signal is present but internet access is unavailable, continue with Mobile Connectivity troubleshooting to check the connection state and IP address.

Cell-scan results