Auth Connect
Version 1.2
Auth Connect App for managing user authentication through Captive Portal from OOS Controller.
When OOS edge’s clients attempt to connect, they are redirected to a Captive Portal page where they must enter their Auth Connect credentials (username and password).
Upon successful authentication, users are granted network access and redirected to a designated homepage.
This feature provides a secure and centralized method of connection management, ensuring only authorized users can access the network. It eliminates the need for pre-shared passwords and is particularly useful in scenarios where controlled access and user verification are required.
How to use Auth Connect
It requires configuration of the edge-side OOS WiFi and adding an AAA server.
he steps are as follows:
Portal mode with OOS Controller
-
Step 1. Go to OOS Security > Authentication > AAA Server page.
-
Step 2. Click Add button and pop-up Add server page.
-
Step 3. Type Name and select OOS Controller type.
-
Step 4. Go to OOS Networking > Wi-Fi page.
-
Step 5. Click “Setting” button and pop-up “Setting” dialog box.
-
Step 6. Select the Authentication page, Click Add button.
-
Step 7. Type name.
-
Step 8. Select Portal mode and WPA-2 version.
-
Step 9. Select AAA server for Controller.
-
Step 10. Type Portal redirection URL.
-
Step 11. Type timeout time.
-
Note: After the timeout, the Internet connection will be disabled and need to re-authentication to get access back.
-
Step 12. Click Apply button
-
Step 13. Login OOS controller
-
Step 14. Ensure the OOS device is provisioned and Appears in Inventory list.
-
Step 15.Click OOS controller Auth Connet APP.
-
Step 16. Click Add button.
-
Step 17. Type Account Name and Password.
-
Step 18. Click Apply button.
-
Step 19. Go to SSID page.
-
Step 20. Select Authentication with portal-Controller.
-
Step 21. Click Apply button.
-
Step 22. Clients connects to the BehindNAT-2.4G-2 SSID and the OOS Wi-Fi Captive Portal page will Appear.
Step 23. Type account name and password that created by Auth Connect.
-
Step 24. Successful results will automatically connect to the redirection URL.
